Textile Spindle Cleaning Equipment
Spiraclean
– In last one decade or so, textile mills have switched over from Ring Frame spindle speed from 14000 to 23000. The old design spindle lubricating machine was not capable of fulfilling needs of spindle lubrication because most of these makers had no original technical knowhow by research but these machines were copied from one another. The technical knowhow of world trusted maker of JAPAN is implemented in a new generation machine SPIRACLEAN by EXEMPLAR ENTERPRISES. Almost all leading Textile Mill Groups of India use this machine for their high speed Ring Frames. A special design of nozzles accomplishes cleaning and lubricating of TFO also in a scientific way like in Ring Frame spindles.
Most Ring Frame users believe that Single Gun machine is suitable for them. In fact Single Gun is 50 years old technology. This old technology is now not in use since new technology machines came with two Guns. One independent Gun for cleaning and flushing and another Gun for Fresh oiling and topping. Following are the handicaps with single gun which are solved by two Gun Machines.
- Fresh oil and used oil comes in contact.
- Oil is wasted since during process there is likelihood of extraction of good oil with old oil.
- Topping feature is not available.
- Oil wastage is more as good oil is wasted when it is extracted along with used oil during flushing. Since topping is not possible mills are forced to completely change the oil during when topping cycle is due. The oil which is present in the bolster is not fully utilised and has a life still left. But this oil is unnecessarily wasted.
- Spiraclean with double Gun gives all justice to spindle to perform well, improvement in quality due to better performance of spindle, cost saving to management by optimum utilisation of oil life without wasting the same.